The Advanced tab allows you to define other options for the job, and it is appropriate to use the system default settings. Also make sure “Show message & audio warning when loss of lock occurs” is checked. In the Tracking tab, make sure that GPS L5 and Glonass are checked on. Once in the rover menu, tap “Instrument” → “GPS Settings” → “Satellite Tracking.” Note: Tap “No” if the Bluetooth connection Warning appears. Go to Rover Menuįrom the main menu, tap “Go to Work!” then “Go to Rover menu.” The unit will take a few moments to connect to the GS15 rover unit. If you have the left screen (Job: TEST –or whatever you named the job– and “Start Base Station”) you simply need to click on the Go to work” and then select “Go to Base menu” – that will take you to the situation shown on the RIGHT image. You should probably be at the Base Menu and “Go to Work” (on right) If not you may be in the Job: “Your name” menu and the “Go to Work” button has “Survey & State Points” and “Start Base” as shown below on left. Power on the second GS15 receiver – this will be the Rover – and wait for it to start up, then make sure the RTK Rover (arrow pointing down) LED lights up green. Hint: You can click on any image to see a larger version. This page will show you how to use a Leica CS15 to configure a GS15 to be a rover for an RTK GPS survey.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |